RPV900 solar controller, is its power input using photovoltaic modules for DC current power supply, the controller will use the MPPT algorithm tracking, inverter-driven pumps, to ensure that the maximum efficiency of the component energy conversion output; aimed at providing water solutions for water shortages and no electricity or unreliable power supply areas.
Input Specification | |
PV Input | |
Maximum Input DC Voltage | 800VDC |
Recommended MPPT Voltage Range | 450～650VDC |
Recommended Input Operation Voltage | 540VDC |
Grid or Backup Generator Input | |
Input Voltage | Three phase380V (-15%～30%) |
Output Specification | |
Rated Output Voltage | 3PH 380V |
Output Frequency | 0～500.00Hz（Default 0～50.00Hz） |
Protection | |
Built-in Protection | Lighting Protection, over-current, overvoltage, output phase-lose, under-load, under-voltage, short circuit, overheating, water pump idling etc. |
General Parameters | |
Application Site | No direct sunshine, no dust, corrosive gas, combustible gas, oil mist, steam, dripping or salinity etc. |
Altitude and Derating Use | 0～2000 m |
Derated use above 1000m, per 100m, the rated output current decrease 1%. | |
Environment Temperatureand Derating Use | -10℃～40℃ (Environment Temperature be 40℃～50℃, please keep derated use.) |
Humidity | ≤95%, non-condensation |
Vibration | less than 5.9 m/s2（0.6g） |
Storage Temperature | -40℃～+70℃ |
Efficiency | Rated Power Run≥93% |
Installation | Wall or rail mounting |
Protection Grade | IP20 |
Cooling | Forced Air Cooling |
Long Press to Scan QR Code
Scan QR Code
